The starting material is suitable tires (eg, car mat). The harder the tire, the stronger will be printed cloth. Also suitable option of using the sole of the other shoe. Of course, plastic taps are considered of higher quality, but at home is quite difficult to cut out the shape of the heel. From a piece of rubber you need to cut along the contour heel. Some manufacturers include an extra pair of shoes complex naboek.
Then degrease and treat sandpaper splices and taps heel firmly fixed to glue a new heel. If the heel proved hollow, then fill the empty space remains rubber or cork from the bottle. Attach new taps need in previous holes.
Prepared rubber heel grease with a thin layer of glue, then press firmly to heel. Neutral shoe glue should be left for 24 hours, for a special adhesive Fast enough for 20-30 minutes.
After the adhesive has set need small nails to fix the heel, that when operating it does not stick out. Typically, only one stud pin for medium sized sufficiently heel nails 4, but for broad naboek - about 10 nails.
You can give a pair of shoes spoiled to the studio, where for some time and money to make any kind of master naboek. If the shoes need to be repaired in a short time, you can contact the Express shop, in which the repair process takes no more than 5-10 minutes.