Method one. Processing piping. Cut a piece of fabric in the shape of a square. The fabric can be cut out of the same jersey that you want to process, but you can simply take an elastic fabric suitable color. Fold the square diagonally cut and carve out strips of desired width. Then cut strips together and sew on the machine to sew jerseys.
The second way. Simple hem. Route reinforcement stitch-stitch at a distance of 1-1, 5 cm from the edge of the article. Anchoring line begins to lay on the edge of the knitted fabric to the center. Make sure that the thread does not contract the canvas. Tuck the edge of product and process its zigzag or overlock width of 3 cm.
The third way. Processing Rulik. Stitch the fabric along the lines of stitching. Duplicated allowance tuck and treat overlock. Then striped jersey width of 2, 5 fold in half a centimeter in length. Sew it slightly stretching. Sew facing the same side of the product. Unscrew the top Bakey and defer the seam on the front side.
Fourth way. Finish the edge jersey piping, and then sweep off a thin Rulik. At some distance from the edge of the reverse side of thin rubber sew. Top baste her double wide strip jersey. Scribbled on the edge Bakey zigzag and then prostrochite this overlock stitch.
Tips. Allowances and the edges with knitted products to handle larger zigzag or overlock seam. The edges are not twisted, refuse it at work 0, 5 centimeters. To preserve the elasticity of the edges prostrochite them on the face of the twin needle. To the edge of the fabric does not stretch during processing, on either side of the seam, apply adhesive tape, and on top of it already lay line.