Dress is never too much, as reasons to boast new clothes. In the wardrobe already miss: classic black, gray office, red club. Dilute your style and sew a little cocktail dress.
You will need: light light fabric with polka dots, monochrome segments chiffon piece leatherette zipper, beads and tulle.
Dress making is not difficult, but the work is laborious and requires your full attention. You will need magazines for sewing with patterns. You can make your own template, but this extra time, so it is ready to use similar models. Need bustier top and skirt sun.
Measure yourself and measuring tape, focusing on dimensional grid, remove the tracing paper on the desired pattern. Now lay the fabric wrong side facing, attach tracing how pins parts and perform cutting. Leave the seam allowances are not less than 0, 5-1 cm.
Top to sit on you is very tight. First Stitch darts on the front of the shelf, otparte their iron. After manually sew one side seam and the other vmetayte lightning. Follow the fitting, all unnecessary Cleave pins. After that, all seams should stitch on the machine and process on the edge overlock.
Almost ready to attach to the top of the same fabric to make piping. Obmelite top and cut out detail. Fold the top of the piping and facing each other, do the gumption on the edge. Remove the piping on the face, bend in the opposite direction - inside the stamp, and again prometayte on top bustier. Thread during brooms try not to pull and relax, because it affects how eventually you will sit thing. Again the fitting. If nothing bristling, can safely perform stitching at 1-2 mm from the edge, and then remove the excess gumption and otparte top iron on the reverse side.
Skirt to acquire volume should be lush. Therefore tailor three identical parts: one from the same fabric as the top, the second - and third of chiffon - of tulle. Cloth skirt is without seams, as a model of "sun". Put together three parts, hand baste the top edge to make it easier to collect it. Stitch the top, using a thread in the bobbin-spandex thus acquire tissue assembly.
It's time to connect the two parts of the dress: Cleave the top and skirt needles. Follow gumption from the wrong side. Try the thing itself, only then prostrochite on a typewriter. Decide on the length of the dress, two petticoats should be longer than the upper 5-8 cm. The extra carefully cut and the edges are treated on overlock seam or "zigzag" with a minimum width of lines, but the average length of the stitch.
Decorate dress belt leatherette, beads and sequins. You can perform the decor from the inside, pulling the fabric mono-filament uneven stitches. On the front side there will be three-dimensional decorative clips that will give the model a certain charm.